Smart lobe pumps

Omac introduces three new lobe pumps, the C110, C115 and C270 models. These pumps present a volumetric capacity of 0,17, 0,21 and 0,38 l/rev. respectively, for maximum pressure from 5 to 13 bars with increased clearances rotors.

C110 and C115 models are provided with DN40 connections, while the C270 model is provided with DN50 connections.

In order to achieve the highest hygienic standard, the lobe pumps are as easily fully cleanable as to enable hot water consumption and reduce the use of chemical products for their cleaning.

The materials used, surface finishing and all the characteristics of the design have enabled to get the European Hygienic Engineering & Design Group – EHEDG certification. Alike all other models Series C, the C100, C220 and C570 featured new design with new front loading seals for easier and quick servicing. In addition, maintenance is also simplified by means of a new external axial adjustment system.

All the parts in contact with the product are made of stainless steel 1.4404, pump body is cast with integral connections without welding. The rotors have been designed as to reach the best efficiency and cause less damage to the product at the same time.

The pumps of the Series C offer further energy saving, less power thanks to less internal friction and efficiency improvement thanks to the possibility of selecting three different tolerances of the rotors accordingly the working pressure. Two kinds of rotors are proposed, four-lobes and dual wing (bi-lobes) with new design.

The bearing housing is made of nickel-plated cast iron, sturdy and compact with roundish profile and equipped with feet for horizontal or vertical (self-draining) installation.

As the other Omac lobe pump series B and BF, appreciated all over the world for stoutness and performances, new C Series confirms their reliability and safety having obtained the Atex certification depositing technical file at TÜV. They can be supplied in Atex execution with classification II 2G kc T4, for the installation in areas with presence of atmosphere potentially explosive caused by gas/vapour and inflammable liquids.

All Omac lobe pumps are available also in special materials such as Titanium, Hastelloy, and Monel.


Effect of rosehip flour on the properties of wheat dough and bread

  Bulgarian Researchers investigated the effect of rosehip flour on some properties of wheat dough and bread, and the results were published in the Ukrainian...

Non-chlorine detergent formulations as an alternative for unpasteurised milk removal from stainless steel surfaces

  Hygiene is a major concern in the dairy industry, and detergents based on hypochlorite have commonly been utilised for cleaning-in-place (CIP) regimes. However, due...

Black soybean cooking water powder as a novel clean-label ingredient

  Black soybean cooking water (BSCW), a by-product of the soybean paste industry, is a novel foaming and emulsifying material. Its application, however, is limited...



8-12/09/2024, RIMINI
24-26/09/2024 - NORIMBERGA, GERMANIA
9-12/10/2024 - MILANO
16-17/10/2024 - VERONA
17/10/2024, BERGAMO
28-31/10/2024, SHANGHAI, CINA
4-7/11/2024, PARIS, FRANCIA
5-7/11/2024 - DUBAI, EAU
12-15/11/2024 MILANO
18-20/11/2024 - SAHANGHAI, CINA
20-21/11/2024, MILANO
24-26/11/2024 - NORIMBERGA, GERMANIA
26-28/11/2024 BORDEAUX, FRANCIA
18-22/01/2025 - RIMINI
2-5/02/2025 - COLONIA, GERMANIA
5-7/02/2025 - BERLIN, GERMANIA
16-18/02/2025 - RIMINI
23-25/02/2025 - BOLOGNA
16-18/03/2025 - DÜSSELDORF, GERMANIA
13-15/04/2025 RIYADH, ARABIA
24-26/04/2025 - ISTANBUL, TURCHIA
13-15/05/2025 PARMA
18-22/05/2025 - DÜSSELDORF, GERMANIA
20-22/05/2025 - BARCELONA, SPAGNA
27-30/05/2025 - MILANO