Up To Next: the remanufacturing program that helps the planet


With SEW-EURODRIVE’s Up To Next remanufacturing program, used gearmotors are as new again in just seven working days, with the same quality, restored performance and a two-year warranty. The gearmotor is totally regenerated thanks to a program specifically developed to preserve the environment, increase the useful life of the components by reducing costs and waste and prolong the reliability of the systems.

Up To Next remanufacturing program allows you to extend the life cycle of SEW gearmotors through a regeneration process that involves the replacement of worn parts and components that affect the performance or useful life of the gearmotor. The repair takes place in just seven days and the regenerated gearmotor has a two-year guarantee.

By giving new life to the gearmotors to bring them back to their original performance through the replacement of worn parts only and the reassembly of all the other components, SEW-EURODRIVE intends to offer a concrete contribution to the protection of the environment and natural resources, in line with the values of social responsibility and sustainable development which have always inspired the company’s activity. In fact, the Up To Next program represents a circular economy solution , which makes it possible to reduce the use of raw materials and the CO2 emissions that would be generated with the direct disposal of malfunctioning products and the production of new gearmotors.

Furthermore, the Up To Next remanufacturing program allows you to reduce time and costs , because the remanufactured gearmotor is ready in just seven working days and at a lower cost than a new one. All while ensuring excellent system reliability , given that the remanufactured gearmotors offer the same performance as the new ones and are covered by a twenty-four month guarantee on the entire component.

SEW-EURODRIVE remanufacturing differs from standard repair and other forms of recovery of worn components in its completeness. In fact, this service allows for a total regeneration of the gearmotor , which is refurbished to restore all the original characteristics in terms of quality, performance and reliability.

The program is currently available for four gearmotor sizes (57, 67, 77, 87), with R / K / F / S series gearboxes and DRN.. / DRN.. motor with brake.

In order to access Up To Next, certain requirements are required: the gearbox casing must be intact and reusable, as well as the stator, rotor, brake and encoder/resolver of the motor.

After sending the request for remanufacturing of the gearmotor to be regenerated, it must be sent to the SEW-EURODRIVE factory in Solaro. The gearmotor received is inspected to verify the requirements necessary for remanufacturing. If it meets these requirements, disassembly is carried out. The reusable parts are then cleaned, new SEW original components are prepared for the parts to be replaced and the gearmotor is then reassembled. New oil , final inspection and painting are the last stages of the remanufacturing process before delivery.

For more information on the Up To Next program:


SEW-EURODRIVE is a family-run German multinational, with headquarters in Bruchsal, specialized in the production and marketing of products and systems for industrial, logistics and process automation. Flexibility, spirit of collaboration, transparency and ethics guide the activity of SEW-EURODRIVE, which since 1931 has contributed to the quality of life and the conservation of energy resources by developing new skills, sustainable solutions and innovative and reliable technologies that can ensure lasting success for clients.

The multinational has been present in Italy since 1968 with the Drive Technology Center in Solaro, near Milan, where the management offices, Operations and Customer Services are located. The Drive Centers in Turin, Bologna, Verona, Caserta and the Sales Office in Pescara ensure a widespread presence throughout the country, faithful to the company motto “Think global, act local”.
SEW-EURODRIVE Italia is committed not only to the development of technological solutions for industrial, logistic and process automation for the main industrial sectors, but also to creating a creative context of trust and growth for people to contribute to sustainable development of the social context, in line with the essential ethical values and key principles of SEW-EURODRIVE.

Via Bernini 12
20033 Solaro MI – Italy
Numero verde 800.909.600


The May issue of “Industrie Alimentari” is now available

  In this issue, we publish a study to determine the presence of histamine in canned mackerel (Scomber japonicus-Scomber colias) marketed in Sardinia (Italy) by...

Effect of pulsed electric field treatment on beef cuts properties

  The effect of pulsed electric field (PEF) treatment on beef cuts was performed by Czech Researcher based on two consecutive experiments and the results...

Your challenges, our mission

  Our entire portfolio of devices, solutions and services is specifically developed to solve customers' specific problems   Production processes in the food and beverage industry have...



28-29/05/2024 - MONACO, GERMANIA
28-30/05/2024 PARMA
6-7/06/2024 - PARMA
12-15/06/2024 - BANGKOK, TAILANDIA
18-21/06/2024 - SHANGHAI, CINA
8-12/09/2024, RIMINI
24-26/09/2024 - NORIMBERGA, GERMANIA
9-12/10/2024 - MILANO
16-17/10/2024 - VERONA
5-7/11/2024 - DUBAI, EAU
12-15/11/2024 MILANO
18-20/11/2024 - SAHANGHAI, CINA
24-26/11/2024 - NORIMBERGA, GERMANIA
26-28/11/2024 BORDEAUX, FRANCIA
18-22/01/2025 - RIMINI
2-5/02/2025 - COLONIA, GERMANIA
5-7/02/2025 - BERLIN, GERMANIA
16-18/02/2025 - RIMINI
23-25/02/2025 - BOLOGNA
16-18/03/2025 - DÜSSELDORF, GERMANIA
18-22/05/2025 - DÜSSELDORF, GERMANIA
27-30/05/2025 - MILANO